The iLO is running in FIPS mode.
ActionAction
1. Enter the iLO configuration screen and turn off FIPS mode.
2. Boot the server into F10 mode.
3. After making all changes, enable FIPS mode.
Intelligent ProvisioningIntelligent Provisioning does not reimage AOIP does not reimage AOIP
SymptomSymptom
Intelligent Provisioning PXE flashing does not reimage Always On Intelligent Provisioning.
NOTE:NOTE:
The user can follow the command lines only for the reference from Grub menu.
ActionAction
Update the Kernel command line with the word "Install". For example:
NOTE:NOTE:
Modify the command as per the system requirements.
Accessing version information in deployment settingsAccessing version information in deployment settings
SymptomSymptom
Version information for the Deployment settings utility is blank.
CauseCause
Version information is no longer located in the Deployment settings utility.
ActionAction
Click the System Information icon at the top of the screen for version information.
A browser does not import a deployment profile correctlyA browser does not import a deployment profile correctly
SymptomSymptom
Intelligent Provisioning does not import a deployment profile correctly.
ActionAction
Verify that the profile is saved as a
linuxefi /IP3.30/vmlinuz media=net splash quiet
iso1=http://192.168.100.101/iso/IP330.2019_0103.230.iso iso1mnt=/mnt/bootdevice
nicmac=5c:b9:01:c5:43:d0 install
echo 'Loading initial Ramdisk...'
initrdefi /IP3.30/initrd.img
To Next Page
Loading...
