This symbol indicates the presence of hazardous energy
circuits or electric shock hazards. Refer all servicing to
qualified personnel.
WARNING: To reduce the risk of injury from electric
shock hazards, do not open this enclosure. Refer all
maintenance, upgrades, and servicing to qualified
personnel.
This symbol indicates the presence of electric shock hazards.
The area contains no user or field serviceable parts. Do not
open for any reason.
WARNING: To reduce the risk of injury from electric
shock hazards, do not open this enclosure.
This symbol on an RJ-45 receptacle indicates a network
interface connection.
WARNING: To reduce the risk of electric shock, fire,
or damage to the equipment, do not plug telephone or
telecommunications connectors into this receptacle.
This symbol indicates the presence of a hot surface or hot
component. If this surface is contacted, the potential for
injury exists.
WARNING: To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
This symbol indicates that the component exceeds the
recommended weight for one individual to handle safely.
WARNING: To reduce the risk of personal injury or
damage to the equipment, observe local occupational
health and safety requirements and guidelines for
manual material handling.
These symbols, on power supplies or systems, indicate that
the equipment is supplied by multiple sources of power.
WARNING: To reduce the risk of injury from electric
shock, remove all power cords to disconnect power
from the system completely.
Removal and replacement procedures 40
To Next Page
Loading...
