hpmont HD20 Series User Manual

Shenzhen Hpmont Technology Co., Ltd Appendix A Parameters
HD20 Series Inverters User Manual －149－
No. Name Range
Factory
Default
Unit
Modified
attributes
Setting
F20.21
Type of fifth latest (the
last) fault
E0007: Stall overvoltage
E0008: Fault of power module
E0009: Heatsink overheat
E0010: Fault of braking unit
E0011: CPUfault
E0012: Parameters
auto-tuning fault
E0013: Contactor is not
actuated
E0014: Fault of current
detection circuit
E0015: Fault of input phase
E0016: Fault of output phase
E0017: Inverter overload
E0018: Inverter output is
unloaded
E0019: Motor overload
E0020: Reserved
E0021: Access fault of Control
board EEPROM
E0022: Access fault of display
panel EEPROM (only
displaying without any
protection)
E0023: Fault setting of
parameters
E0024: Fault of external
equipment
E0025: PID reference loss
E0026: PID feedback loss
E0027: PID feedback out of
limiting
E0028: SCI communication
time-out
E0029: SCI communication
error
0 1 *
F20.22
Setting frequency at the
last fault
0.00－400.00Hz 0.00Hz 0.01Hz *
F20.23
Running frequency at the
last fault
0.00－400.00Hz 0.00Hz 0.01Hz *
F20.24
Bus voltage at the last
fault
0－999V 0V 1V *
F20.25
Output voltage at the last
fault
0－999V 0V 1V *
F20.26
Output current at the last
fault
0.00－99.99A 0.00A 0.01A *
F20.27
Input terminal status at the
0－0x3F 0 1 *
A

hpmont HD20 Series Specifications

General

Brand	hpmont
Model	HD20 Series
Category	Inverter
Language	English