Appendix A Parameters Shenzhen Hpmont Technology Co., Ltd
―150― HD20 Series Inverters User Manual
No. Name Range
Factory
Default
Unit
Modified
attributes
Setting
last fault
F20.28
Output terminal status at
the last fault
0-0x7 0 1 *
F20.29 Interval of fifth latest fault 0.0-6553.5 hours 0.0 0.1h *
F20.30 Type of fourth latest fault 0-99 0 1 *
F20.31
Interval of fourth latest
fault
0.0-6553.5 hours 0.0 0.1h *
F20.32 Type of third latest fault 0-99 0 1 *
F20.33 Interval of third latest fault 0.0-6553.5 hours 0.0 0.1h *
F20.34 Type of second latest fault 0-99 0 1 *
F20.35
Interval of second latest
fault
0.0-6553.5 hours 0.0 0.1h *
F20.36 Type of first latest fault 0-99 0 1 *
F20.37 Interval of first latest fault 0.0-6553.5 hours 0.0 0.1h *
Group F21 Reserved
Group F22 Reserved
Group F23 PWM Control Parameters (refer to pages 105
105)
F23.00 Set the carrier frequency 1-16kHz 8kHz 1kHz ×
F23.01 Reserved
F23.02 PWM overshoot enable
0: Disabled
1: Enabled
1 1 ×