hpmont HD30 Series - Group D01 Reserved; Group D02 Water Control Status Parameters

Chapter 6 Function Introduction Shenzhen Hpmont Technology Co., Ltd
―54― HD30 Series Inverters User Manual
No. Name Description Range
【
factory setting
】
3: Incorrect data frame checking.
4: Incorrect data frame content.
d00.53
Actual length
【actual value】
d00.54 Total length
【
actual value
】
d00.53 displays actual length; d00.54 displays total length.
d00.55 Total power-on time
【
actual value
】
d00.56
Total operation time
【actual value】
d00.55 display total power-on time; d00.56 displays total operation time. The unit is hour.
d00.57
High bit of total motor energy depletion
【actual value】
d00.58 Low bit of total motor energy depletion
【
actual value
】
Display high bit (d00.57) and low bit (d00.58) of the total motor energy depletion.
d00.59 High-energy running this time
【
actual value
】
d00.60
Low-energy running this time
【actual value】
Display the high-energy (d00.59) and low-energy (d00.60) running.
d00.61
Fault at the moment
【actual value】
Display this time fault.
6.1.2 Group d01 Reserved
6.1.3 Group d02 Water Control Status Parameters
Only when select the water and wastewater applications can Group d02 be enabled with
HD30-WIO.
No. Name Description Range
【
factory setting
】
d02.00
Current time(hours)
0【0】
Display the current time whose format is “xx yy”” corresponding to “xx” hours “yy” minutes.
d02.01
Pump 1 status
0【0】
d02.02 Pump 2 status 0
【
0
】
d02.03
Pump 3 status
0【0】
d02.04 Pump 4 status 0
【
0
】
d02.05
Pump 5 status
0【0】
d02.06 Pump 6 status 0
【
0
】
d02.07
Pump 7 status
0【0】
Display the pump status.
0: At rest.
1: Run.
2: Fault.