HT EASYTEST COMBI519 User Manual

EASYTEST-COMBI519
EN - 79
7.
A
t the end of the test, if the detected phase sequence is
incorrect, the instrument displays a screen like the one
shown to the side (result "213") and the “NOT OK”
message.
123 15/10 – 18:04
TN
2 1 3
NOT OK
1T
MODE
8.
A
t the end of the test, if the two detected voltages are in
phase (phase concordance between two distinct
three-phase systems), the instrument displays a screen
like the one to the side (result "11-") and the “OK”
message.
123 15/10 – 18:04
TN
1 1 -
OK
1T
MODE
9. Press the SAVE key to store the test result in the instrument’s memory (see § 7.1) or
the ESC/MENU key to exit the screen without saving and go back to the main
measuring screen.

HT EASYTEST COMBI519 Specifications

General

Brand	HT
Model	EASYTEST COMBI519
Category	Measuring Instruments
Language	English