HT EASYTEST COMBI519 User Manual

EASYTEST-COMBI519
EN - 88
7.2. RECALL OF DATA TO DISPLAY AND MEMORY DELETION
1. Position the cursor onto MEM by using the arrow keys
(,) and confirm with ENTER. The screen to the side
appears on the display. The screen contains:
 The number of the memory location where the
measure is saved
 The date in which the measure was saved
 The type of measure saved
 The total number of saved measures for each screen
and the residual available memory
MEM 15/10 – 18:04
N. Date Type
001 14/01/21 RPE
002 15/01/21 M
003 15/01/21 Lo
004 15/01/21 LoZ
005 16/01/21 Auto
006 17/01/21 Loop
007 19/01/21  V%
Tot: 007 Free: 992
  All
Rec Pag DEL
2. Use the arrow keys (,) to select the measure to be
recalled to display.
3. Press the SAVE/ENTER key to display the saved
measure. Press the ESC/MENU key to go back to the
previous screen.
4. Use the arrow keys  or  to select option “Pag” and
proceed to the next screen.
5. Select the option “DEL” to delete the whole content of the
instrument's memory (“All” option) or the last saved data
(“Last” option). The following screen appears on the
display:
MEM 15/02 – 18:04
N. Date Type
001 14/01/21 RPE
002 15/01/21 M
003 15/01/21 Lo
004 15/01/21 LoZ
005 16/01/21 Auto
006 17/01/21 Loop
007 19/01/21  V%
Tot: 007 Free: 992
  All
Rec Pag DEL
6. Press the SAVE/ENTER key to confirm data deletion.
The message “Memory empty” is shown on the display.
7. Press the MENU/ESC key to exit the function and go
back to the general menu.
MEM 15/10 – 18:04
DELETE ALL?
ENTER / ESC

HT EASYTEST COMBI519 Specifications

General

Brand	HT
Model	EASYTEST COMBI519
Category	Measuring Instruments
Language	English