HT PVCHECKs-PRO User Manual

PVCHECKs-PRO
EN - 9
5. GENERAL MENU
Pressing the ESC key in any condition of the instrument allows going back to the general
menu, in which internal parameters may be set and the desired measuring function may
be selected. Use the cursor to select one of the options and confirm with ENTER to access
the desired function.
MENU 15/03 – 18:04
DMM : Multimeter
UREM : Remote Unit
IVCK :
PVTest sequence
M  : Insulation
GFL : Find Insul.fault
RPE : Continuity
DB : PVMod.Database

MENU 15/03 – 18:04
SET : Settings
MEM : Data saved
PC : Data transfer

5.1. SET – INSTRUMENT SETTINGS
Move the cursor to SET by using the arrow keys (,) and
confirm with ENTER. The instrument shows the screen which
allows access to internal settings. Settings will be maintained
also after switching off the instrument.
SET
15/10 – 18:04
Language
Date and time
General settings
Irradiance
Information
Operator Name
5.1.1. Language
Move the cursor to Language by using the arrow keys (,)
and confirm with ENTER. The instrument shows the screen
which allows setting the system language. Select the desired
option by using the arrow keys (,). Press the ENTER key
to confirm or the ESC key to go back to the previous screen.
SET 15/10 – 18:04
English
Italiano
Español
Deutsch
Français
Portuguese

HT PVCHECKs-PRO Specifications

General

Brand	HT
Model	PVCHECKs-PRO
Category	Measuring Instruments
Language	English