PVCHECKs-PRO
EN - 36
6.6.2. How to modify an existing PV module
1. Select the PV module to be modified from the database
by means of the arrow keys ( , ).
2. Press the ENTER key and select the “Edit” command
using the arrow key ().
3. Confirm selection with ENTER.
4. By using the internal virtual keyboard, it is possible to
define again the name of the module or leave it
unchanged by means of the arrow keys , , , ).
Press ENTER to digit any character of the desired name.
5. Press the SAVE key to save the name of the new module
thus defined or to access the new parameter setting.
DB 15/10 – 18:04
Man. SENEC
Name: M420
Type : Bifacial
Voc : 38.00 V
Isc : 13.99 A
Tmp.Isc( ) : 0,046 %/°C
Tmp.Voc() : -0,260 %/°C
Bif.Coef. : 90.0 %
37/64
New Edit Delete Free
6.6.3. How to delete an existing PV module
1. Select the PV module from the database by means of the
arrow keys ( , ).
2. Press the ENTER key and select the “Delete” command
by means of the arrow key () to delete the selected
module.
3. Confirm the selection with ENTER or press ESC/MENU
to exit.
4. The position “Free” indicates the residual number of
modules which can still be entered into the database with
reference to maximum allowed number (64 modules)
DB 15/10 – 18:04
Prod. SENEC
Name: M420
Type : Bifacial
Voc : 38.00 V
Isc : 13.99 A
Tmp.Isc( ) : 0,046 %/°C
Tmp.Voc() : -0,260 %/°C
Bif.Coef. : 90.0 %
37/64
New Edit Delete Free
CAUTION
It is not possible to modify nor delete the “DEFAULT” PV module
which is a factor
settin
.
To Next Page
Loading...
Need help?
General
