Charging the battery
Before you turn on and start using HTC One, it is recommended that you charge the battery.
§ If the battery has been discharged for several days, you may need to charge HTC One for several
minutes before powering it on.
§ Use only the adapter and the USB cable that came with HTC One to charge the battery. When
the battery power is too low, make sure to use the power adapter to charge, not the USB cable
connection with your computer.
1. Insert the small end of the USB cable into the USB connector.
2. Insert the other end of the USB cable into the power adapter.
3. Plug in the power adapter to an electrical outlet to start charging the battery.
§ As a safety precaution, the battery may stop charging to avoid overheating.
§ We recommend you check the temperature of the battery while you're charging. Also, avoid
charging the battery in hot environments.
§ When you're using the Internet and charging the battery, HTC One may become warmer. This is
normal.
§ To conserve energy, unplug the power adapter from the electrical outlet after you finish
charging.
Switching the power on or off
Switching the power on
Press the POWER button until HTC One vibrates.
When you turn on HTC One for the first time, you’ll need to set it up.
16 Unboxing
To Next Page
Loading...
Need help?
General
