Connecting to a Wi-Fi network via WPS
If you're using a Wi-Fi router with Wi-Fi Protected Setup (WPS), you can connect HTC One easily.
1. Turn Wi-Fi on, and check the list of detected Wi-Fi networks.
See Turning Wi-Fi on on page 168.
2. Tap > WPS Push, and then press the WPS button on your Wi-Fi router.
To use the Wi-Fi Protected Setup (WPS) PIN method, tap > WPS Pin Entry.
Logging into a public Wi-Fi network automatically (WISPr)
You can set HTC One to automatically log into a public Wi-Fi network that you regularly use. This
saves you the trouble of going through the Wi-Fi provider's web authentication every time you
connect to their Wi-Fi network. Just add your login credentials to the WISPr (Wireless Internet
Service Provider roaming) settings.
The access point of the Wi-Fi network needs to support the WISPr web portal. Consult the Wi-Fi
provider for details.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. If Wi-Fi connection is off, tap the Wi-Fi tile to turn it on.
3. Tap .
4. Tap > Advanced.
5. Under WISPr settings, select Auto login and then tap WISPr account settings > Add a new
account.
6. Enter the service provider name, your login name (the full domain name), and password.
7. Tap > Save
8. Connect to the public Wi-Fi network.
§ If you have access to several public Wi-Fi networks, you can add up to five sets of login
credentials to the WISPr accounts list.
§ In the WISPr accounts list, press and hold an account to remove or edit it.
Connecting to VPN
Add virtual private networks (VPNs) so you can connect and access resources inside a local network,
such as your corporate network.
Before you can connect to your organization's local network, you may be asked to:
169 Internet connections
To Next Page
Loading...
Need help?
General
