Huawei LUNA2000-5-S0 - 7.3 Battery Commissioning; 7.3.1 Battery Deployment

Figure 7-1 Download Mode
● Method 2: Search for FusionSolar on Huawei AppGallery and download the
latest installation package.
● Method 3: Scan the following QR code and download the latest installation
package.
Figure 7-2 QR code
Download and install the latest FusionSolar app by referring to the quick guide for
the corresponding inverter model or the FusionSolar App Quick Guide . Then
register the installer and create a PV plant and owner (skip this step if the account
has been created). You can obtain the
FusionSolar App Quick Guide by scanning
the following QR code.
Figure 7-3 FusionSolar App Quick Guide
7.3.1 Battery Deployment
NO TE
● During system deployment, if the communications cables Enable+/Enable– are correctly
connected, the SUN2000 enables the battery and the indicator is on. Do not press the
black start button to enable the battery. Otherwise, the communications cable
connection between the SUN2000 and the battery cannot be veried.
● In cascaded networking scenarios, connect an inverter equipped with energy storage
devices for quick deployment.
LUNA2000-(5-30)-S0
User Manual 7 System Commissioning
Issue 15 (2024-01-12) Copyright © Huawei Digital Power Technologies Co., Ltd. 100