5.3 Determining the Installation Position
Installation Angle Requirement
The battery can be oor-mounted and wall-mounted. The installation angle
requirement is as follows:
● Do not install the battery at forward tilted, back tilted, side tilted, horizontal,
or upside down positions.
Installation Position Requirements
Install the battery on a solid brick-concrete structure or concrete wall or oor. If
other types of walls and oors are used, they must be made of re-retardant
materials and meet the load-bearing requirements of the equipment.
Installation Space Requirements
● During installation, ensure that there is no other devices (except related
Huawei devices and awnings) or ammable or explosive materials around the
batteries. Reserve adequate space for heat dissipation and safety isolation.
● When the battery is mounted on a wall, do not place any objects under the
battery.
Figure 5-1 Installation space
5.4 Equipment Installation
5.4.1 Floor-Mounted Installation
Installation Precautions
Figure 5-2 shows the dimensions of mounting holes for a battery.
LUNA2000-(5-30)-S0
User Manual 5 System Installation
Issue 15 (2024-01-12) Copyright © Huawei Digital Power Technologies Co., Ltd. 68
To Next Page
Loading...
