EasyManua.ls Logo

Huawei LUNA2000-5-S0 - 1.4 Mechanical Safety

Huawei LUNA2000-5-S0
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NO TE
The operation and service life of the battery depend on the operating temperature.
Install the battery at a temperature equal to the ambient temperature or in a better
environment.
The operating temperature of the LUNA2000 ranges from –20°C to +55°C. If the
LUNA2000 is installed in a cold environment, the built-in thermal control system starts
to heat the battery to achieve better performance. The heating process consumes
rechargeable power, which reduces the system energy eciency in cold weather.
If the LUNA2000 is stored in a cold environment (for example, 0°C) before installation,
the LUNA2000 needs some time (< 2 h) to heat up before it can be charged. You are
advised to place the LUNA2000 in a warm place before installation to facilitate
commissioning.
When the ambient temperature of the LUNA2000 is higher than +45°C or lower than –
10°C, the battery charge and discharge power will be derated.
1.4 Mechanical Safety
D ANGER
When working at heights, wear a safety helmet and safety harness or waist belt
and fasten it to a solid structure. Do not mount it on an insecure moveable object
or metal object with sharp edges. Make sure that the hooks will not slide o.
WARNING
Ensure that all necessary tools are ready and inspected by a professional
organization. Do not use tools that have signs of scratches or fail to pass the
inspection or whose inspection validity period has expired. Ensure that the tools
are secure and not overloaded.
WARNING
Do not drill holes into the equipment. Doing so may aect the sealing
performance and electromagnetic containment of the equipment and damage
components or cables inside. Metal shavings from drilling may short-circuit boards
inside the equipment.
General Requirements
Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches must not be
exposed for an extended period of time.
Do not perform operations such as arc welding and cutting on the equipment
without evaluation by the Company.
Do not install other devices on the top of the equipment without evaluation
by the Company.
LUNA2000-(5-30)-S0
User Manual 1 Safety Information
Issue 15 (2024-01-12) Copyright © Huawei Digital Power Technologies Co., Ltd. 11

Table of Contents

Related product manuals