Figure 7-15 Querying the battery status
7.3.4 Battery Maintenance and Upgrade
Forced Charge and Discharge
● For a single inverter or a cascaded system based on Smart Dongle networking, tap
Maintenance on the home screen.
● For a cascaded system based on SmartLogger networking, tap Device monitoring on
the home screen, select the corresponding inverter, and tap Maintenance.
● If the inverter is upgraded or reset, or the battery is upgraded or goes oine, forced
charge and discharge will stop.
Step 1 Choose Maintenance > Battery maintenance > Forced charge and discharge ,
set forced charge and discharge parameters, and tap Submit.
LUNA2000-(5-30)-S0
User Manual 7 System Commissioning
Issue 15 (2024-01-12) Copyright © Huawei Digital Power Technologies Co., Ltd. 113
To Next Page
Loading...
