Figure 4-1 Grid-tied ESS networking diagram (dashed boxes indicate optional
components)
Inverter Model Supported By the ESS
SUN2000-(2KTL-6KTL)-L1
SUN2000-3/5/6/8/10/12KTL-M1
SUN2000-(8K, 10K)-LC0 series (The ESS must be upgraded to FusionSolarDG
V100R002C00SPC125 or later.)
SUN2000-(12K-25K)-MB0 series (The ESS must be upgraded to FusionSolarDG
V100R002C00SPC125 or later.)
Networking 2: Multiple Inverters Cascaded
You can add inverters and batteries to increase capacity. A maximum of three
inverters can be cascaded. Each battery connects to the inverter through an
independent RS485 port and is managed by the inverter connected to it.
SmartLogger Networking
SmartLogger V300R001C00SPC100 and later versions are supported in this
scenario. For details about commissioning, see 6.3 ''Battery Commissioning''.
LUNA2000-(5-30)-S0
User Manual 4 Application Scenarios and Settings
Issue 15 (2024-01-12) Copyright © Huawei Digital Power Technologies Co., Ltd. 36
To Next Page
Loading...
