Huawei LUNA2000-5-S0 - Page 52

Figure 4-5 Battery control parameter setting
Parameter Description Value Range
Working mode Set this parameter to the maximum
self-consumption mode.
● Maximum self-
consumption
● TOU (time-of-use)
● Fully fed to grid
Maximum charge
power (kW)
Retain this parameter to the maximum
charge power. Additional conguration
is not required.If only one battery
expansion module is congured, the
maximum charge power is 2.5 kW.
[0, Maximum charge power]
Maximum discharge
power (kW)
Retain this parameter to the maximum
discharge power. Additional
conguration is not required.If only one
battery expansion module is congured,
the maximum charge power is 2.5 kW.
[0, Maximum discharge
power]
End-of-charge SOC (%) Set the charge cuto capacity. 90%–100%
LUNA2000-(5-30)-S0
User Manual 4 Application Scenarios and Settings
Issue 15 (2024-01-12) Copyright © Huawei Digital Power Technologies Co., Ltd. 43