Huawei MA5600 User Manual

2008-2009 Huawei Access Network
Product Cases

Huawei MA5600 Specifications

General

Brand	Huawei
Model	MA5600
Category	Multiplexer
Language	English

Summary

MA5600 Cases

Fan Block Alarm Is Generated Because of the Fan Fault

Explains fan block alarm due to fan fault, high temperature, and steps to resolve.

Description of the Traffic-suppress Command

Details the traffic suppression command for broadcast, unknown unicast, and multicast packets.

The Broadcast Packets Cause the 678 Error for the User Dialup Through Certain Modems Connected to the MA5600 After the Cutover

Discusses broadcast packets causing dialup errors after a network cutover.

Dialup Error 691 Is Displayed Sometimes Because the Modem Selects a Wrong PVC in the Case of Single-Port Multi-PVC Service of the MA5600

Addresses dialup error 691 due to modem selecting wrong PVC in multi-PVC service.

The 691 or 678 Error Occurs When the Multi-PVC Service Is Configured on the Single-PVC Modem Working with the DSLAM

Explains 691/678 errors when multi-PVC service on single-PVC modem with DSLAM.

The Loop Detection Function Fails Because the Modem Does Not Transmit the BPDU Packet for the Loop Detection

Covers loop detection failure due to missing BPDU packets from modems.

Dark Screen Occurs When an IPTV User Is Watching a Scrambled Live Channel Under the MA5600 Because the Encryption Key of the CA Card Expires

Details dark screen issues in IPTV due to expired CA card encryption keys.

The Dialup of the Subscribers Connected to the MA5600 Fails Due to the Incorrect Setting of the Broadcast Suppression on the Convergence Switch

Discusses dialup failures caused by incorrect broadcast suppression settings.

MA5600 is not showing alarms on imanager N2000 BMS

Troubleshoots alarms not being displayed on iManager N2000 BMS.

Conflict mac-address also can not manage dslam from inbound management

Covers inability to manage DSLAM due to MAC address conflicts.

FAQ-How Does the MA5600 Support Anti DoS Attack Function

Explains the MA5600's capability to support anti-DoS attack functions.

FAQ-How to Solve the Problem That the MA5600 is Enabled with Anti-MACspoofing So That the Hot-Spot Service in the Modem with the Fixed IP Address is Interrupted

Solves interruption of hotspot service due to anti-MACspoofing.

FAQ-how to judge what is the problem about ADSL line quality

Guides on judging and fixing ADSL line quality issues.

FAQ-How to recover admin password in MA5600

Explains how to recover the admin password for MA5600.

FAQ - How can you avoid dial-in delay while using PPPoE+

Discusses avoiding dial-in delay when using PPPoE+.

FAQ-How to Solve the Problem That the Entire Shelf Fail to Go Online Due to the MA5600 Upstream Fiber Problem

Addresses entire shelf failure to go online due to upstream fiber issues.

FAQ- Why configurations are lost when using save configuration command

Investigates why configurations are lost after using the save configuration command.

MA5600T (IP DSLAM) Cases

Failure to save data after recover a data from Data Center

Addresses failure to save data after recovering from a data center backup.

Abnormal PADT Packet Attack interrupting access users to dialup

Discusses PADT packet attacks interrupting user dialup access.

Interruption of the BTV Service at an Interval of About 5 Minutes Due to Deferred Response to the General Query Packets

CPE under MA5600T forward PADIs from other CPE cause PPPoE user disconnected randomly.

Smart AX MA5600T ACL malfunction caused by PPP&DHCP packets SCUB CPU capturing and not processing by ACL

GPON FTTx Cases

256 multicast channels can't be online at the same time in 5680T

The Voice Communication on the MA5606T Is Unidirectional Because of the Routing Problem of the Media Stream

The Interconnection Between the Switch of Company C and MA5600T Fails Because the LACP Configuration of the Switch of Company C Is Incorrect

FAQ-How to Change the Default T-CONT 0 Type of the MA5600T Providing the GPON Service

THE GICF Board Is in the config State and the Service Cannot Recover After the MA5680T Is Restarted

The MA5620G Plays the Busy Tone After Offhook Because of Incorrect Descriptor Signaling Delivered by the Softswitch of company x

Users Connected to the MA5620G Cannot Make Calls Normally After Taking the Phone off the Hook Because RTP Resources of the Softswitch Are Allocated Insufficiently

Addresses call failures due to insufficient softswitch RTP resources.

The ONT Connected to the MA5680T Goes Offline Frequently Due to the Incorrect Connection of Optical Fibers on the Optical Splitter

Users Fail to Log In to the Server from the N2000 BMS Client Because of the Incorrect Setting of the Client

Troubleshoots login failures to N2000 BMS server due to client settings.

FAQ-How to Implement the VoIP Service of the MA5680T

The FE Port Cannot be Activated After the HG810e Connected to the MA5680T Is Powered Off Because the ONT Profile Does Not Match the ONU Profile

The ONT Connected to the MA5680T Cannot Receive the Broadcast Packet Due to the Fault of the ONT

All ONTs (HG850s) Connected to a PON Port Get Online and Offline Frequently Because One of the ONTs Connected to the PON Port Is Faulty

UA5000 Broadband Service

ADSL Subscribers cannot be authenticated due to high temperature

Error 678 Is Prompted Frequently During the Dialup of the UA5000 Broadband Subscriber because the Wire Sequence of the Uplink Straight Through Cable Is Incorrect

Troubleshoots frequent error 678 during dialup due to incorrect cable wiring.

Download speed is too slow because of the wrong cable connect between UA5000 and S6500

Packet loss to UA5000. When occurring, the IPMB reports CPU occupancy at 73

Discusses packet loss and high CPU occupancy on UA5000 IPMB.

UA5000 Narrow-band Service

Retransmission of H.248 Packets Fails in the UA5000R17C02B107 Because the Interface Attribute Is Incorrect

The MG Interface Fails to Be Established Because of Incorrect H.248 Negotiation Version

Troubleshoots MG interface establishment failure due to incorrect H.248 negotiation version.

Service Boards in the Entire Slave Shelf of the UA5000 Fail to Register Because One DSL Board in the Shelf Is Faulty

Activation Failure of the IUA Link on the UA5000 Because the Corresponding Port on the SoftSwitch Firewall Is Not Enabled

No Tone upon Offhook for Subscribers under the UA5000 Because the HSCI Board of the SoftX3000 Is Faulty

iManager N2000 BMS Cases

Failure in Alarm Displaying on the N2000 BMS Due to the Error of Setting the Source IP Address of the Trap Packets on the MA5680T

Troubleshoots alarm display failures in N2000 BMS due to incorrect trap source IP.

Unable to Telnet DSLAM From BMS Because of Device access Proxy Process Problem

NEs Are Detached from the N2000 BMS After the Anti-ARP Attack Feature Is Enabled on the Uplink Switch

Device Is Added and Then Disappears During the Synchronization Because of the License Issue

Explains device disappearance during synchronization due to license issues.

N2000 BMS Fails to Add an NE Because of the Deadlock of the Account on the Device Side

N2000 BMS Server Is Shut Down Automatically Because the Setting of the Configuration File of Solaris OS Is Incorrect

Login to the Xmanager Fails Because the Default Monitoring Port of the dtlogin Process Is Port 0

N2000 BMS Fails to Automatically Detect Devices Because of the Auto-Negotiation Error of the Network Card

Standby Server Fails to Be Started Because the N2000 BMS HA System Is Powered Off Abnormally

Troubleshooting of the Abnormal Replication Relation Between the Active and the Standby Servers of the N2000 BMS HA System

Failure in the Establishment of the Replication Relation on the HA System (Watchman) Because of Inconsistency of the Name of the Replication Link

All the Narrowband NEs Fall out of Management After the N2000 BMS Server Is Restarted

While login the Database Backup Tool,it appears Fail to connect the server