Huawei Quidway S2700 series - Page 117

<Quidway> display member-getfile-state
The status of member switches getting file:
------------------------------------------------------------------------
SN Device MacAddress IPAddress Result
------------------------------------------------------------------------
2 S2700 0002-0002-0002 10.0.0.2 success
3 S2700 0003-0003-0003 10.0.0.3 success
Interfaces running NDP and NTDP are not required on member switches. If NDP and NTDP
are disabled successfully, run the display member-interface-state command, and you can view
that success is displayed.
<HUAWEI_0.Quidway> display member-interface-state ndp
The result of member switches executed disable member interface command:
------------------------------------------------------------------------------
SN Device MacAddress IpAddress result
------------------------------------------------------------------------------
3 S2700 0004-0004-0004 10.0.0.4 success
2 S2700 0003-0003-0003 10.0.0.3 success
1 S2700 0002-0002-0002 10.0.0.2 success
[HUAWEI_0.Quidway-cluster] display member-interface-state ntdp
The result of member switches executed disable member interface command:
------------------------------------------------------------------------------
SN Device MacAddress IpAddress result
------------------------------------------------------------------------------
3 S2700 0004-0004-0004 10.0.0.4 success
2 S2700 0003-0003-0003 10.0.0.3 success
1 S2700 0002-0002-0002 10.0.0.2 success
If member switches are successfully restarted, run the display member-reboot-state command,
and you can view that success is displayed.
<Quidway> display member-reboot-state
The result of member switches rebooting:
------------------------------------------------------------------------
SN Device MacAddress IPAddress Result
------------------------------------------------------------------------
1 S2700 0002-0002-0002 10.0.0.2 success
2 S2700 0003-0003-0003 10.0.0.3 success
------------------------------------------------------------------------
If the current configurations are successfully saved on member switches, run the display
member-save-state command, and you can view that success is displayed.
<Quidway> display member-save-state
The result of member switches saving:
------------------------------------------------------------------------
SN Device MacAddress IPAddress Result
------------------------------------------------------------------------
1 S2700 0002-0002-0002 10.0.0.2 success
2 S2700 0003-0003-0003 10.0.0.3 success
------------------------------------------------------------------------
If member switches successfully synchronize configuration files to the FTP server, run the
display synchronization-result command, and you can view that success is displayed.
<Quidway> display synchronization-result
The result of member switches' synchronization:
------------------------------------------------------------------------------
SN Device MacAddress IpAddress result
------------------------------------------------------------------------------
1 S2700 0002-0002-0002 10.0.0.2 success
2 S2700 0003-0003-0003 10.0.0.3 success
3 S2700 0004-0004-0004 10.0.0.4 success
Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management 3 HGMP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
107