Huawei Quidway S2700 series - Checking the Configuration

l Run:
test-failtimes times
The trap threshold for continuous probe failures is set for the NQA test instance.
l Run:
timeout time
The timeout period is set for the NQA test instance.
l Run:
ttl number
The TTL value in the NQA test packet is set.
NOTE
This parameter cannot be configured for DNS and Trace test instances.
l Run:
tos value
Type of Service (TOS) is set for the test packet.
NOTE
This parameter cannot be configured for DNS and Trace test instances.
l Run:
tracert-hopfailtimes times
The hop fail times are set for the Trace test instance.
NOTE
This parameter can be configured only for Trace test instance.
l Run:
tracert-livetime first-ttl first-ttl max-ttl max-ttl
The lifetime is set for the Trace test instance.
NOTE
This parameter can be configured only for Trace test instance.
l Run:
vpn-instance vpn-instance-name
The VPN instance name is configured for the NQA test instance.
NOTE
This parameter cannot be configured for DNS test instance.
l Run:
vpn-instance vpn-instance-name
The VPN instance name is configured for the NQA test instance.
NOTE
This parameter cannot be configured for DNS, and DHCP test instance.
----End
6.15.3 Checking the Configuration
After setting universal parameters for NQA test instances, you can view the test result.
Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management 6 NQA Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
294