Huawei Quidway S2700 series - Example for Configuring the Batch Distribution Function for an HGMP Cluster

return
3.6.6 Example for Configuring the Batch Distribution Function for
an HGMP Cluster
Networking Requirements
As shown in Figure 3-8, all the Layer 2 switches belong to the same cluster. Administrator-1 is
the administrator switch of the cluster and other switches are member switches. The member ID
of Member-2 is 2 and the member ID of Member-3 is 3.
Member-2 and Member-3 are required to download configuration files in batches from the FTP
server.
Figure 3-8 Networking diagram of configuring the batch distribution function for an HGMP
cluster
IP/MPLS
core
......
FTP Server
2.0.0.1/8
SFTP Server
2.0.0.2/8
NM station
3.0.0.1/8
Log station
4.0.0.1/8
Administrator-1
10.0.0.1/8
Member-1
Member-2
Member-3
10.0.0.4/8
Ethernet0/0/1 Ethernet0/0/2
Ethernet0/0/1
Ethernet0/0/2
Ethernet0/0/1
Ethernet0/0/1
Cluster
Ethernet0/0/3
Ethernet0/0/1
1.0.0.2/8
Device
MAC Address Device MAC Address
Administrator-1 0001-0001-0001 Member-1 0002-0002-0002
Member-2 0003-0003-0003 Member-3 0004-0004-0004
Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management 3 HGMP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
159