SNMP host:3.0.0.1
FTP server:2.0.0.1
SFTP server:2.0.0.2
cluster-member ftp-timeout: 300 sec(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : enabled
There are 4 member(s) in the cluster, and 0 of them are down.
Step 10 Disable SNMP NAT on the administrator switch.
[HUAWEI_0.Administrator-1] cluster
[HUAWEI_0.Administrator-1-cluster] undo cluster-snmp-nat enable
Step 11 Configure the routes of member switches to ensure that reachable routes exist between member
switches and the SNMP host.
# Configure member switch 1.
[HUAWEI_1.Member-1] ip route-static 3.0.0.0 8 10.0.0.1
# Configure member switch 2.
[HUAWEI_2.Member-2] ip route-static 3.0.0.0 8 10.0.0.1
# Configure member switch 3.
[HUAWEI_3.Member-3] ip route-static 3.0.0.0 8 10.0.0.1
NOTE
Multiple member switches can be configured simultaneously through incremental configuration. For
configuration details, see Example for Configuring the Incremental Configuration Function for an
HGMP Cluster.
Step 12 Configure the SNMP agent function on member switches.
# Configure member switch 1.
[HUAWEI_1.Member-1] snmp-agent target-host trap address udp-domain 3.0.0.1 params
securityname cluster
# Configure member switch 2.
[HUAWEI_2.Member-2] snmp-agent target-host trap address udp-domain 3.0.0.1 params
securityname cluster
# Configure member switch 3.
[HUAWEI_3.Member-3] snmp-agent target-host trap address udp-domain 3.0.0.1 params
securityname cluster
NOTE
Multiple member switches can be configured simultaneously through incremental configuration. For
configuration details, see Example for Configuring the Incremental Configuration Function for an
HGMP Cluster.
----End
Configuration Files
l Configuration file of Administrator-1.
#
sysname Administrator-1
#
vlan batch 10
#
cluster enable
ntdp enable
Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management 3 HGMP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
156
To Next Page
Loading...
