Huawei Quidway S2700 series - Page 349

Example
Run the display rmon alarm command. If information about the alarm table is displayed, it
means that the configuration succeeds.
<Quidway> display rmon alarm 1
Alarm table 1 owned by Test300 is VALID.
Samples absolute value : 1.3.6.1.2.1.16.1.1.1.6.1 <etherStatsBroadcastPkts.1>
Sampling interval : 30(sec)
Rising threshold : 500(linked with event 1)
Falling threshold : 100(linked with event 1)
When startup enables : risingOrFallingAlarm
Latest value : 1975
Run the display rmon event command. If information about the event table is displayed, it
means that the configuration succeeds.
<Quidway> display rmon event
Event table 1 owned by Test300 is VALID.
Description: null.
Will cause log when triggered, last triggered at 0days 00h:24m:10s.
Event table 2 owned by Test300 is VALID.
Description: forUseofPrialarm.
Will cause snmp-trap when triggered, last triggered at 0days 00h:26m:10s.
Run the display rmon eventlog command. If information about the event logs is displayed, it
means that the configuration succeeds.
<Quidway> display rmon eventlog
Event table 1 owned by Test300 is VALID.
Generates eventLog 1.1 at 0days 00h:39m:30s.
Description: The 1.3.6.1.2.1.16.1.1.1.6.1 defined in alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Run the display rmon history command to display the RMON history.
<Quidway> display rmon history
History control entry 1 owned by Test300 is VALID,
Samples interface : Ethernet0/0/1<ifEntry.402653698>
Sampling interval : 30(sec) with 10 buckets max.
Last Sampling time : 0days 00h:09m:43s
Latest sampled values :
octets :645 , packets :7
broadcast packets :7 , multicast packets :0
undersize packets :6 , oversize packets :0
fragments packets :0 , jabbers packets :0
CRC alignment errors :0 , collisions :0
Dropped packet: :0 , utilization :0
Run the display rmon prialarm command. If information about the extended alarm table is
displayed, it means that the configuration succeeds.
<Quidway> display rmon prialarm 1
Prialarm table 1 owned by Test300 is VALID.
Samples delta value : .1.3.6.1.2.1.16.1.1.1.6.1+.1.3.6.1.2.1.16.1.1.1.7.1
Sampling interval : 30(sec)
Rising threshold : 1000(linked with event 2)
Falling threshold : 0(linked with event 2)
When startup enables : risingOrFallingAlarm
This entry will exist : forever.
Latest value : 16
Run the display rmon statistics command to display the RMON statistics.
<Quidway> display rmon statistics
Statistics entry 1 owned by Test300 is VALID.
Interface : GigabitEthernet<ifEntry.402653698>
Received :
octets :142915224 , packets :1749151
broadcast packets :11603 , multicast packets:756252
undersized packets :0 , oversized packets:0
Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management 7 RMON Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
339