Huawei Quidway S2700 series - Page 87

Port PSE Priority :Unknown
Port Available power value:0
# View the neighbor information of SwitchA.
[SwitchA] display lldp neighbor brief
Local Intf Neighbor Dev Neighbor Intf
Exptime
Eth0/0/1 SwitchB Eth0/0/1 115
Eth0/0/2 SwitchB Eth0/0/2 115
Eth0/0/3 SwitchB Eth0/0/3 115
l View the configurations on SwitchB.
Same as information about SwitchA.
----End
Configuration Files
l Configuration file of SwitchA
#
sysname SwitchA
#
vlan batch 100
#
interface Vlanif1
ip address 10.10.10.1 255.255.255.0
#
bpdu enable
#
lldp enable
#
interface Eth-Trunk1
port link-type
trunk
port trunk allow-pass vlan 100
#
interface Ethernet0/0/1
eth-trunk 1
#
interface Ethernet0/0/2
eth-trunk 1
#
interface Ethernet0/0/3
eth-trunk 1
#
lldp management-address 10.10.10.1
#
return
l Configuration file of SwitchB
#
sysname SwitchB
#
interface Vlanif1
ip address 10.10.10.2 255.255.255.0
#
bpdu enable
#
vlan batch 100
#
lldp enable
#
interface Eth-Trunk1
port link-type
trunk
port trunk allow-pass vlan 100
#
interface Ethernet0/0/1
Quidway S2700 Series Ethernet Switches
Configuration Guide - Network Management 2 LLDP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
77