Huawei Technologies Proprietary
28
demand of particular VPI and VCI, you need to adjust the default
settings accordingly so as to adapt to the changes.
3.2 Configuring IP Settings on Your
Computer
Follow these steps to configure the IP settings:
1) Understand the default IP settings for the MT882: IP
address (192.168.1.1), subnet mask (255.255.255.0).
2) Make sure your computer has the TCP/IP protocol installed
and enabled.
z
If you have an Ethernet port on your computer, it probably
already has TCP/IP protocol installed.
z
If you are using Windows XP, the TCP/IP is enabled by
default for standard installations.
3) Configure the IP address and subnet mask of your
computer. The computer shall work in the same subnet as
that of the MT882. for example, IP address: 192.168.1.100,
subnet mask: 255.255.255.0.
For computers running non-Windows operating systems,
follow the instructions for your OS to configure the IP setting to
occupy the same subnet as MT882.
3.3 Accessing the Web-based Configuration
Manager
Once your PC’s IP settings allow it to access the Web-Based
configuration manager, you can change the factory default settings
to enable the MT882 to connect to Internet.
To Next Page
Loading...
