Huawei Technologies Proprietary
81
5.3 PPPoA Configuration
Configurations on MT882
Location Parameters Comments
PVC
Select any one from the eight
PVCs.
VPI/VCI
The value shall be provided by
your ISP.
Encapsulation
The value shall be provided by
your ISP. Usually you can keep
the default value: LLC.
Wan Type Select “PPP”.
Connection
Type
Select “PPPoA”.
User name
and Password
The values shall be provided by
your ISP.
Default Route Select “Enable”.
ATM Setting
DNS Select “Enable”.
Configurations on MT882
NAT It is recommended to enable the function of NAT.
DNS
It is recommended to have DNS Relay function
enabled.
DHCP Mode
It is recommended to have DHCP Server function
enabled.
Configurations on the user’s PC
To Next Page
Loading...
Need help?
General
