Huawei Technologies Proprietary
83
5.5 RFC 2684 Bridged (Static IP)
Configuration
Configurations on MT882
Location Parameters Comments
PVC
Select any one from the eight
PVCs.
VPI/VCI
The value shall be provided by
your ISP.
Encapsulation
The value shall be provided by
your ISP. Usually you can keep
the default value: LLC.
Wan Type Select “RFC2684 Bridged”.
Connection
Type
Select “Static IP”.
IP Address
and Subnet
Mast
The values shall be provided by
your ISP.
Default Route Select “Enable”.
ATM Setting
Gateway IP
Address
The value shall be provided by
your ISP.
NAT It is recommended to enable the function of NAT.
DNS
It is recommended to have DNS Relay function
enabled.
And set DNS IP address provided by your ISP.
DHCP Mode
It is recommended to have DHCP Server function
enabled.
To Next Page
Loading...
Need help?
General
