Huawei Technologies Proprietary
47
z
Destination IP Address and Subnet Mask: enter the
destination IP address and subnet mask provided by ISP
for the WAN interface of your MT882.
z
Default Gateway: enter the gateway address provided by
ISP. The data is forwarded to the destination through the
gateway you set. Or you can choose an Interface Name to
route data traffic.
z
Interface Name: check this option to select an interface
name from the drop-down list to replace the default
gateway. The generation of the interface depends on how
you set the PVCs.
III. Save
z
Click the Apply button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the Tools>System Setting page, and click Save &
Restart button to save new settings.
4.8 LAN Setting
Click the LAN Setting of Advanced in the Wizard Column to
set the LAN interface. The LAN IP address identifies the LAN port
(eth-0) as a node on your network; that is, its LAN IP address must
be in the same subnet as the computers in your LAN.
You can change the default LAN IP address and Net Mask to
suit for your LAN.
To Next Page
Loading...
Need help?
General
