Huawei SmartAX MT882 - RFC 2684 Bridged (DHCP) Configuration

Huawei Technologies Proprietary
84
Configurations on the user PC
IP Address
and Network
Mask
It is recommended to set the mode as obtaining an
IP address automatically.
DNS
It is recommended to set the mode as obtaining a
DNS server’s IP address automatically.
5.6 RFC 2684 Bridged (DHCP) Configuration
Configurations on MT882
Location Parameters Comments
PVC
Select any one from the eight
PVCs.
VPI/VCI
The value shall be provided by
your ISP.
Encapsulation
The value shall be provided by
your ISP. Usually you can keep
the default value: LLC.
Wan Type Select “RFC2684 Bridged”.
Connection
Type
Select “DHCP”.
ATM Setting
Default Route Select “Enable”.
NAT It is recommended to enable the function of NAT.
DNS
It is recommended to have DNS Relay function
enabled.
And set DNS IP address provided by your ISP.
www.Shoo.ir