Huawei SmartAX MT882 - RFC 2684 Route (IPoA) Configuration

Huawei Technologies Proprietary
85
Configurations on MT882
Location Parameters Comments
DHCP Mode
It is recommended to have DHCP Server function
enabled.
Configurations on the user PC
IP Address
and Network
Mask
It is recommended to set the mode as obtaining an
IP address automatically.
DNS
It is recommended to set the mode as obtaining a
DNS server’s IP address automatically.
5.7 RFC 2684 Route (IPoA) Configuration
Configurations on MT882
Location Parameters Comments
PVC
Select any one from the eight
PVCs.
VPI/VCI
The value shall be provided by
your ISP.
Encapsulation
The value shall be provided by
your ISP. Usually you can keep
the default value: LLC.
Wan Type
Select “RFC2684 Routed
(IPoA)”.
ATM Setting
IP Address
and Subnet
Mast
The values shall be provided by
your ISP.
www.Shoo.ir