Huawei Technologies Proprietary
77
The Ping utility is essentially a tool that is used to see if a
computer is operating and also to see if network connections are
intact. You can enter the host name or IP address of the device you
want to check, and then click the Ping button. The result will be
shown below.
4.20 Traffic Statistics
Click the Traffic Statistics of Status in the Wizard Column to
view the log of device.
Figure 4-28 Traffic Statistics
The device keeps statistic of the data traffic that it handles. You
are able to read the amount of Receive and Transmit packets that
pass through the device on both the WAN (Wide Area Network) ports
and the LAN (Local Area Network) ports. Click the Refresh button to
update the counters and the Reset button to clear the counters. The
traffic counter will reset when the device is rebooted.
To Next Page
Loading...
Need help?
General
