Huawei Technologies Proprietary
37
III. DHCP
The setting page displayed below will appear if you select
DHCP mode, which means you can automatically acquire IP address
from the DHCP sever of ISP.
Figure 4-5 RFC2684 Bridged Connection-application of DHCP
z
Default Route: this setting will allow you to automatically
acquire IP address from the DHCP sever of ISP. The data
will be sent through WAN interface whenever a client LAN
computer accesses the Internet. The default setting of
default route is “Disabled”.
IV. Save
z
Click the Apply button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the Tools>System Setting page, and then click Save &
Restart button to save new settings.
To Next Page
Loading...
Need help?
General
