Huawei Technologies Proprietary
39
z
IP Address and Subnet Mask: enter the IP address and
subnet mask provided by ISP for the WAN interface of your
MT882.
z
Default Route: this setting specified the IP address below
is using for default route of LAN. The data will be sent
through WAN interface whenever a client LAN computer
accesses the Internet. The default setting of route is
“Disabled”, and the recommended setting is “Enabled”.
z
Default Gateway: enter the Gateway address provided by
ISP.
III. Save
z
Click the Apply button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the Tools>System Setting page, and click Save &
Restart button to save new settings.
To Next Page
Loading...
