Huawei Technologies Proprietary
45
I. Configuration page
Figure 4-10 NAT Configuration
II. Parameter explanation
The explanation of parameters in the above windows is as
below.
z
NAT: select it to enable or disable the NAT. By default, it is
enabled.
z
UPNP Setting: select it to enable or disable the UPNP
(Universal Play and Plug). By default, it is enabled.
z
VPN Pass-Trough: select it to enable or disable the VPN
Pass-through with PPTP protocol and IPSec protocol. By
default, it is enabled.
III. Save
z
Click the Apply button to save the settings in the RAM.
To Next Page
Loading...
Need help?
General
