Huawei Technologies Proprietary
89
2) Indicate your NIC IP address to 192.168.1.3
3) Disable Proxy service.
4) Launch your Web browser and type in http://192.168.1.1
5) Use the default user name: admin and password: admin
Q: My configuration is gone after I reboot the MT882.
If you want to keep your settings after rebooting the MT882.
Please go to Web-based Configuration Manager, enter the
Tools>System Setting page, and click Save & Restart button to
save new settings.
Figure 6-1 System Setting
Q: I can’t upgrade with the new firmware.
Please make sure the file that you have downloaded is valid.
Q: Why can’t I access the Internet by using virtual dialing
through Microsoft’s Internet Gateway?
Internet Gateway supports PPPoE itself. No other PPPoE
terminal software shall be installed again.
To Next Page
Loading...
