Huawei SUN2000-90KTL Series User Manual

No. Cable Type Conductor
Cross-
Sectional Area
Range
Outer
Diameter
Source
3 AC output power
cable
● If you connect a
ground cable to the
ground point on the
chassis shell, you
are advised to use a
three-core (L1, L2,
and L3) outdoor
cable and M10
OT/DT terminals
(L1, L2, and L3).
● If you connect a
ground cable to the
ground point in the
maintenance
compartment, you
are advised to use a
four-core (L1, L2, L3,
and PE) outdoor
cable, M10 OT/DT
terminals (L1, L2,
and L3), and M8
OT/DT terminals
(PE). You do not
need to separately
prepare a PE cable.
● Copper-core
cable:
– L1, L2,
L3: 25–95
mm
2
– PE: ≥ 16
mm
2
. For
details,
see Table
5-6.
● Aluminum
alloy cable
or copper-
clad
aluminum
cable:
– L1, L2,
L3: 35–95
mm
2
– PE: ≥ 16
mm
2
. For
details,
see Table
5-6.
24–57 mm Prepare
d by the
custome
r
4 Tracking system
power cable
Three-core outdoor
copper cable with
dual-layer protection
6 mm
2
14–18 mm Prepare
d by the
custome
r
5 DC input
power
cable
Amphe
nol
UTX PV
Connec
tors
PV cable that meets
the 1500 V standard
4–6 mm
2
(12–
10 AWG)
4.5–7.8 mm Prepare
d by the
custome
r
MC4
EVO2
PV
Connec
tors
4–6 mm
2
(12–
10 AWG)
4.7–6.4 mm Prepare
d by the
custome
r
SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual
5 Electrical Connections
Issue 11 (2020-08-30) Copyright © Huawei Technologies Co., Ltd. 49

Huawei SUN2000-90KTL Series Specifications

General

Brand	Huawei
Model	SUN2000-90KTL Series
Category	Inverter
Language	English