Huawei SUN2000 M0 Series User Manual

Parameter Description
Active power
output limit for
fail-safe
- Species the derating value of the
inverter active power by percentage.
If the Dongle does not detect any
meter data or the communication
between the Dongle and the inverter
is disconnected, the Dongle delivers
the derating value of the inverter
active power by percentage.
Power-
limited grid
connected
(%)
Closed-loop
controller
● SDongle/
SmartLogger
● Inverter
● Set this parameter to SDongle/
SmartLogger when the
SmartLogger1000A is connected.
● If multiple inverters are cascaded,
set this parameter to SDongle/
SmartLogger.
● If there is only one inverter, set
this parameter to Inverter.
Limitation mode ● Total power
● Single-phase power
● If this parameter is set to Total
power, it indicates that no
backfeeding occurs for the three
phases.
● If this parameter is set to Single-
phase power, it indicates that no
backfeeding occurs for the phase
with the maximum power.
PV plant capacity - Species the total maximum active
power in the inverter cascading
scenario.
Maximum grid
feed-in power
(%)
- Species the percentage of the
maximum active power of the grid-
tied point to the PV plant capacity.
Power lowering
adjustment
period
- Species the shortest interval for a
single anti-backfeeding adjustment.
Maximum
protection time
- Species the time for detecting meter
data. If the Dongle does not detect
any meter data within the preset
time, the Dongle delivers the preset
value of the Active power output
limit for fail-safe to the inverter for
protection.
Power raising
threshold
- Species the threshold for raising the
inverter output power.
SUN2000-(3KTL-10KTL)-M0
User Manual C Setting Export Limitation Parameters
Issue 06 (2020-10-23) Copyright © Huawei Technologies Co., Ltd. 95

Huawei SUN2000 M0 Series Specifications

General

Rated AC Output Power	3000W
European Efficiency	96.7%/97%/97%/97.3%/97.5%/97.8%
Communication	RS485, Wi-Fi
Protection Degree	IP65
Weight	17 kg
Dimensions	440 x 650 x 220 mm
Max. efficiency	98.6%
MPPT voltage range	200-1000V
No. of MPPTs	2
Operating temperature range	-25°C to +60°C
Cooling method	Natural convection
Protection rating	IP65
AC output voltage	230V