Huawei SUN2000 M0 Series User Manual

Alarm ID Alarm
Name
Alarm
Severity
Possible Cause Troubleshooting Suggestion
2067 Faulty
Power
Collector
Major Cause ID = 1
Power meter disconnection.
1. Check that the preset power
meter model is the same as
the actual model.
2. Check that the preset
communications parameters
for the power meter are the
same as the actual
congurations.
3. Check that the power meter
is powered on and the RS485
communications cable is
connected.
2072 Transient
AC
Overvolta
ge
Major Cause ID = 1
The inverter detects that
the phase voltage exceeds
the transient AC
overvoltage protection
threshold.
1. Check whether the grid
connection voltage exceeds
the upper threshold. If yes,
contact the local power
operator.
2. If you have
conrmed that
the grid connection voltage
exceeds the upper threshold
and obtained the consent of
the local power operator,
modify the overvoltage
protection threshold.
3. Check that the peak grid
voltage does not exceed the
upper threshold.
NO TE
Contact your dealer or Huawei technical support if the measures listed in the
Troubleshooting Suggestion column have been taken but the fault persists.
SUN2000-(3KTL-10KTL)-M0
User Manual 7 Maintenance
Issue 06 (2020-10-23) Copyright © Huawei Technologies Co., Ltd. 77

Huawei SUN2000 M0 Series Specifications

General

Rated AC Output Power	3000W
European Efficiency	96.7%/97%/97%/97.3%/97.5%/97.8%
Communication	RS485, Wi-Fi
Protection Degree	IP65
Weight	17 kg
Dimensions	440 x 650 x 220 mm
Max. efficiency	98.6%
MPPT voltage range	200-1000V
No. of MPPTs	2
Operating temperature range	-25°C to +60°C
Cooling method	Natural convection
Protection rating	IP65
AC output voltage	230V