EasyManuals Logo

Huawei SUN2000-M3 User Manual

Huawei SUN2000-M3
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
3 SUN2000 Storage
The following requirements should be met if the SUN2000 is not put into use
directly:
Do not unpack the SUN2000.
Keep the storage temperature at –40°C to +70°C and the humidity at 5%
95% RH.
Store the SUN2000 in a clean and dry place and protect it from dust and
water vapor corrosion.
A maximum of six SUN2000s can be stacked. To avoid personal injury or
device damage, stack SUN2000s with caution to prevent them from falling
over.
During the storage period, check the SUN2000 periodically (recommended:
every three months). If any rodent bites are found on the packing materials,
replace the packing materials immediately.
If the SUN2000 has been stored for more than two years, it must be checked
and tested by professionals before being put into use.
SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-
M3
User Manual 3 SUN2000 Storage
Issue 11 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 20

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei SUN2000-M3 and is the answer not in the manual?

Huawei SUN2000-M3 Specifications

General IconGeneral
TypeString Inverter
Rated AC Grid Frequency50 Hz / 60 Hz
DC Connection TypeMC4
Protection DegreeIP65
Cooling MethodNatural convection
CategoryInverter
Adjustable Power Factor Range0.8 leading - 0.8 lagging
Total Harmonic Distortion (THD)≤ 3 %
Operating Temperature Range-25°C to 60°C
CommunicationRS485
Efficiency98%
Protection LevelDC reverse polarity protection, AC overcurrent protection, AC short-circuit protection, Overvoltage protection, Insulation monitoring, Residual current monitoring unit, Arc fault detection

Related product manuals