Huawei SUN2000-M3 - Creating a PV Plant and a User; Smartlogger Networking Scenario

Figure 7-2 Creating multiple installer accounts for the same company
7.1.2 Creating a PV Plant and a User
Figure 7-3 Creating a PV plant and a user
NO TE
● In the quick settings for SUN2000-(29.9KTL/36KTL/40KTL)-M3, the grid code is N/A by
default (automatic startup is not supported). Set the grid code based on the area where
the PV plant is located.
● For details about how to use the site deployment wizard, see FusionSolar App Quick
Guide .
7.1.3 SmartLogger Networking Scenario
For details, see
PV Plants Connecting to Huawei Hosting Cloud Quick Guide
(Inverters + SmartLogger3000), PV Plants Connecting to SmartPVMS Quick
Guide (Inverters + SmartLogger3000 + RS485 Networking)
and PV Plants
SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-
M3
User Manual 7 Man-Machine Interaction
Issue 11 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 65