Huawei SUN2000-M3 - Tool Preparation

4.2 Tool Preparation
Type Tools and Instruments
Install
ation
Hammer drill Drill bit (φ6/φ8) Insulated torque socket
wrench (including an
extension bar)
Diagonal pliers Wire stripper
Phillips insulated torque
screwdriver
Rubber mallet Utility knife Cable cutter
Crimping tool (model:
PV-CZM-22100)
Open-end wrench (model:
PV-MS-HZ or PV-MS open-
end wrench)
Cable tie
Vacuum cleaner Multimeter (DC voltage
measurement range ≥ 1100 V
DC)
Marker
SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-
M3
User Manual 4 Installation
Issue 11 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 22