Huawei SUN2000L Series - Page 110

SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
7 Operations on the Local FusionHome App
Issue 03 (2018-04-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
103
Parameter
Description
Value Range
Parity mode
Specifies the parity mode of
RS485 communications,
which should be the same as
the communication parity
modes of the power
collector and battery.

No parity

Odd parity

Even parity
Comm addr
Specifies the
communications address
used by the SUN2000L to
connect to the upper-level
management unit. Keep the
address different from the
communications address for
any other device on the
same bus.
[1, 247]
Configuring the Management System
1. To set the management system parameters and connect to the management system,
choose Comm config > Management system settings from the Operation console
screen.
Figure 7-38 Connecting to the management system