SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
After the positive and negative connectors snap into place, pull the DC input power cables
back to ensure that they are connected securely.
Figure 5-15 Connecting DC input power cables
----End
Follow-up Procedure
Before removing the positive and negative connectors, ensure that the DC switch is OFF.
To remove the positive and negative connectors from the SUN2000L, insert an open-end
wrench into the notch and press the wrench with an appropriate force.
Figure 5-16 Removing a DC input connector
To Next Page
Loading...
