SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
7 Operations on the Local FusionHome App
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 7-6 Scanning the QR code to connect the mobile phone to the SUN2000L directly
Method 2: The mobile phone connects to the SUN2000L over a router. Do not use this
method for the first login and ensure that the SUN2000L has connected to the router.
Run the app. If the SUN2000L WiFi network has connected to the router, tap the WiFi
name corresponding to the router for connection. After the connection succeeds, the
Inverter list screen displays all the Huawei SUN2000Ls that have connected to the
router.
Figure 7-7 Mobile phone connecting to the SUN2000L over a router
If there is only one SUN2000L on the Inverter list screen, enter the WiFi password to go to the identity
authentication screen.
----End
Procedure on the iOS System
The app allows for connecting to the SUN2000L in the following two ways. Select either way
based on site requirements. After the connection succeeds, the Inverter list screen is
displayed.
Method 1: The mobile phone connects to the SUN2000L directly.
a. Run the app, select Tap to go to system settings and select WiFi network, and tap
the WiFi name corresponding to the SUN2000L.
The name of the connected SUN2000L WiFi network is represented by SUN2000L-its serial number
(SN). The SN is available on the label attached to the side of the SUN2000L.
b. Enter the SUN2000L WiFi password for connection. Use the initial password
Changeme upon first login. Use the initial password upon first power-on and
change it immediately after login. To ensure account security, change the password
To Next Page
Loading...
Need help?
General
