2 Configuring the StellarTrek Device
2.1 Languages and Voices
2.1.1 Adding and Managing Voices
By default, there is only one voice installed on the device, However, when connecting on the Wi-
Fi, there are different Text-to-speech (TTS) voices available, powered by Acapela.
To add a new voice on the StellarTrek:
1. Press and hold the Down arrow to access the Settings menu.
2. In the Settings menu, use the Left and Right arrows to access the item Voices and press
Confirm.
3. In the Voices menu, use the Left and Right arrows to access the item Manage Voices and
press Confirm.
4. In the Manage Voices menu, use the Left and Right arrows to access the item Add Voice
and press Confirm.
5. Select the language of your choice from the list and press Confirm.
6. After selecting a language, the StellarTrek will display a list of the different voices you can
choose for this language. Select the voice of your choice from the list and press Confirm.
Press any other key to cancel.
Once the new voice is selected, it will be installed on the device. The StellarTrek will announce
“Voice update completed” and take you back to the voice menu.
When a new voice has been added to the device, it is now possible to replace it.
To replace a voice on the StellarTrek:
1. Press and hold the Down arrow to access the Settings menu.
2. In the Settings menu, use the Left and Right arrows to access the item Voices and press
Confirm.
3. In the Voices menu, use the Left and Right arrows to access the item Manage Voices and
press Confirm.
4. Select the voice you wish to replace and press Confirm.
5. Use the Left and Right arrows to select the language of your choice from the list and press
Confirm.
6. After selecting a language, the StellarTrek will display a list of the different voices you can
choose for this language. Select the voice of your choice from the list and press Confirm.
7. Press Confirm to replace the voice. Press any other key to cancel.
The StellarTrek will start the installation of the new voice and uninstall the other voice, before taking
you back to the voice menu.
2.1.2 System, Navigation and Reading Voices
You can select a different voice for the system, for navigation, and for reading. The system voice
is used for most of the operations performed on the device. The navigation voice is used for
instructions and intersection descriptions while navigating. The reading voice is used for the
detection modes.
To change the system, navigation or reading voice on the device:
1. Press and hold the Down arrow to access the Settings menu.
To Next Page
Loading...