To turn the device Off, press and hold the Power button again. The StellarTrek device will
announce: “Press Confirm to shutdown, press any other key to cancel”. After pressing the
Confirm button, you will hear two beeps and feel 2 vibrations indicating the device is powering Off.
You must wait about 30 seconds before you can again power on the StellarTrek.
1.3.2 Sleep Mode
To put the StellarTrek into sleep mode, simply press the Power button. Press the Power button
again to reactivate it.
1.4 Key Describer Mode
You can use the Key Describer Mode at any moment to help you remember what are the different
buttons of the StellarTrek device. To activate the Key Describer Mode, double press on the Where
am I button, located at the bottom left of the front face of the device.
When in the Key Describer Mode, the device will announce the name of every button pressed by
the user. To exit the Key Describer Mode, double-press on the Where Am I button again.
1.5 Button Description
The Power button
Press to put the device into Sleep mode. Press again to wake the device.
Press and hold the Power button to shut down the device. A confirmation message will be
announced. Press Confirm to complete the shutdown.
The Record button
Press to create a landmark and record a 4 second vocal description.
Press and hold Record button: Used to launch Route creation where users can record a 4 second
description of the route. Note that any recorded entries can be modified at an ulterior moment.
The Volume Up button.
Press to increase the volume of the voice.
The Volume Down button.
Press to decrease the volume of the voice.
Press the Volume Up and Volume Down buttons together to switch to Speed control mode. Upon
doing so, the Volume Up and Volume Down buttons can be used to increase or decreased the
speed of the voices on the StellarTrek.
The Voice button
Press to repeat the last message read by the device. It can also be used to interrupt a playing
message.
Press and hold Voice button: Activates the voice recognition feature
The Where am I button
It provides information on the user's current position.
To Next Page
Loading...