2. In the Settings menu, use the Left and Right arrows to access the item Voices and press
Confirm.
3. In the Voices menu, use the Left and Right arrows to access the type of voice you wish
to change: System Voice, Navigation Voice or Reading Voice and press Confirm.
4. Use the Left and Right arrows to select a voice of your choice from the list and press
Confirm. If there is only one voice on the device, you will have the option to add a voice
by selecting the item Add Voice and pressing Confirm.
5. If you want the reading voice to automatically detect the language of a document, use the
Left and Right arrows to select the item Automatic and press Confirm.
Note that changing the system voice will change the language of the system.
2.1.3 Changing the Speech Recognition Language
It is possible to change the language used for speech recognition when entering an address. If it
was not configured in the settings before, when entering an address, the first time you will try to
use the speech recognition, the system will ask you to choose your preferred language. Use the
Left and Right arrows to select the language of your choice from the list and press Confirm.
To change the speech recognition language:
1. Press and hold the Down arrow to access the Settings menu.
2. In the Settings menu, use the Left and Right arrows to access to the item Voices and
press Confirm.
3. In the Voices menu, use the Left and Right arrows to access to the item Speech
Recognition Language and press Confirm.
4. Use the Left and Right arrows to select the language of your choice from the list and press
Confirm.
2.1.4 Changing the TTS Speed
Another parameter related to the TTS feature that can be modified is its speed.
To change the speed of the TTS:
1. Press and hold the Down arrow to access the Settings menu.
2. In the Settings menu, use the Left and Right arrows to access to the item Voices and
press Confirm.
3. In the Voices menu, use the Left and Right arrows to access to the item Speed and press
Confirm.
4. The different speeds available are listed from slowest to fastest. Use the Left and Right
arrows to choose the speed of your choice and press Confirm.
Alternatively, you can toggle between volume and speed by pressing the Volume Up and Volume
Down buttons simultaneously. Once you toggle from volume to speed, the Volume Up and Volume
Down buttons can be used to modify the speed rather than the volume.
2.1.5 Voice Auto-Switch
Voice auto-switch is a feature configured for the Navigation Voice. It enables smart voice switching
for the names of streets and points of interest.
If, for example, you use the device in English but navigate in a place where the streets and points
of interests are in French, the Voice auto-switch feature will dictate the instructions in English, but
announce the names of the locations in French.
To Next Page
Loading...