2.7 Software Update
The Software Update item in the System menu will check weekly if a new update is available. It is
also possible to check manually if a new update is available for download. To update your
StellarTrek, you must first have an active connection to the Internet using the built-in Wi-Fi. Note
that you must connect the StellarTrek to a power outlet with the AC power adapter or the battery of
your device must be at least 20% charged for the update to be performed.
See section 7 for the full details of how to update the StellarTrek software.
2.7.1 Factory Reset
If you wish to undo all of your customizations on the device and erase all of your data, including
maps, you can do so by performing a factory reset. This will erase all the user settings and restore
the application to the system version.
To perform a factory reset:
1. In the Settings menu, use the Left and Right arrows to access to the item System and
press Confirm.
2. In the System menu, use the Left and Right arrows to access to the item Factory Reset
and press Confirm.
3. The StellarTrek will ask: “Are you sure you want to Factory Reset this device?”.
4. Press Confirm to perform the factory reset.
To Next Page
Loading...