To activate the Voice Auto-Switch feature:
1. Press and hold the Down arrow to access the Settings menu.
2. In the Settings menu, use the Left and Right arrows to access to the item Voices and
press Confirm.
3. In the Voices menu, use the Left and Right arrows to access to the item Voice Auto-
Switch.
4. Press Confirm to toggle the Voice Auto-switch on or off.
2.2 Text Entry Method
When prompted to enter a text string such as a Wi-Fi password or a search keyword, you can do
so by using the virtual keyboard of the StellarTrek.
To type text, use the Up, Down, Left and Right arrows to navigate through the characters. Upon
configuring the device, you can choose to map the characters like on a standard QWERTY
computer keyboard, or in alphabetical order. Press and hold the Confirm button on a character to
toggle to capital (uppercase) letters and accented options. Press Confirm to enter the selected
character. Note that when you enter a capital letter, the device will read it in a higher pitch voice to
differentiate it from a lowercase character.
You can also access a symbol keyboard by navigating to the “Switch to symbols” key, the first
button of the first row of the keyboard (below the “z”). Next is the “Switch to numbers” button,
allowing you to access a numerical keyboard. Between these two keys is the Shift key, that can be
pressed to write a character in capital letters. Pressing and holding the Shift key will lock the capital
letters.
At any time, you can press the Voice button or press and hold the Right arrow to listen to the text
you have entered so far. When you are done typing, validate your input by pressing the Go To
button.
Alternatively, it is also possible to use a physical Bluetooth keyboard by pairing it with the
StellarTrek (see section 2.3 below for more details on Bluetooth pairing).
2.2.1 Change Keyboard Layout
By default, the virtual keyboard used for text entry is a QWERTY layout. It is possible, however, to
change this layout to one that you might be more familiar with. The other keyboard layouts available
include the common ones, such as AZERTY or QWERTY, but also a keyboard arranged in
alphabetical order. Note that a change in the keyboard layout will also apply to a paired Bluetooth
keyboard.
To change the layout of the virtual keyboard:
1. Press and hold the Down arrow to access the Settings menu.
2. In the Settings menu, use the Left and Right arrows to access the item System and press
Confirm.
3. Use the Left and Right arrows to access the item Regional Settings and press Confirm.
4. In the Regional Settings menu, use the Left and Right arrows to access the item Keyboard
Layout and press Confirm.
5. Choose the layout of your choice from the list using the Left and Right arrows and press
Confirm.
2.3 Bluetooth
To configure the Bluetooth settings on the StellarTrek device, you first need to access the Bluetooth
menu:
1. Press and hold the Down arrow to access the Settings menu.
To Next Page
Loading...