for more details on how to type text with the StellarTrek device. End your entry with the Go To
button. If successful, the router SSID and password will be added to your list of configured
connections (routers) and the new connection will be launched.
2.4.4 Display Saved Networks
After connecting to a Wi-Fi network for the first time, you will not need to scan for the network every
time you wish to connect to it again.
In the Wi-Fi Settings menu, use the Left and Right arrows to navigate to the Display Saved
Networks item and press Confirm. The StellarTrek will display a list of networks remembered by
your device. Use the Left and Right arrows to browse the list of networks. If a network is available
within range of the device, it will be announced. Press Confirm to connect to it.
If you wish to disconnect from the current network, use the Left and Right arrows to navigate to it
within the list. Use the Up and Down arrows to navigate to the item Disconnect and press Confirm.
If you wish to forget the current network and remove it from the list of Saved networks, use the Up
and Down arrows to navigate to the item Forget and press Confirm. The Wi-Fi network will still
be available in the list of Available networks after being removed.
2.4.5 Enter Network Manually
If you cannot find the network that you are looking for in the Scan Available Network submenu, or
if the list of networks is too long to browse quickly, you can search for it manually.
In the Wi-Fi Settings menu, use the Left and Right arrows to navigate to the Enter Network
Manually item and press Confirm. You will be prompted to type the name of the network you are
looking for.
If the network is available, it will be announced by the StellarTrek. Press Confirm to connect to it.
You will then be prompted to enter, in sequence, the SSID, the security type, the password and the
visibility (hidden or non-hidden). You can skip an item by pressing the Right arrow and return to
the previous ones by pressing the Left arrow. Press Confirm on the Connect item to save the
network and connect to it.
2.5 Installing & Updating Maps
When you have the right maps installed on your device, it is possible for the GPS to locate your
live position on those maps.
Please note that as the StellarTrek maps are very large and detailed, a direct download on the
device can take several minutes per map. Also, you can use the map selection menu to select and
unselect specific maps that you need which will help you manage the memory space on your
device.
2.5.1 Selecting and Installing Maps
To select maps, you must first press and hold the Down arrow to access the Settings menu. Use
the Left and Right arrows to navigate to the item Maps Management, and press Confirm.
You can choose to add or remove maps from your StellarTrek’s internal memory. If you have a
map already installed, it will be listed as “selected”. If you select a map that is not in your
StellarTrek’s memory, the device will download it over Wi-Fi. This can take several minutes.
To Next Page
Loading...